high pressure water jet cutter pump price 420 mpa WAMIT waterjet cutting pump
Specification of our waterjet cutting intensifier pump:
|
Intensifier Pump |
Model | WMT3742Z |
| motor | SIEMENS | |
| Method of Direction Regulation | Electronic direction regulation | |
| Pressure Range | 50-420MPA, continuous pressure is 330-380Mpa | |
| Maximum Flow of Hydraulic
Pump |
90 L/min | |
| Maximum Discharge Capacity | 3.7 L/min | |
| Maximum Diameter of Gem
Nozzle |
0.33 mm | |
| Power of Master Motor | 37 KW | |
| Power Source | 380V/50HZ, also work at 220V/60HZ, 415V |
In order to better reduce costs, engineers and manufacturers continue to explore, and now water jets can effectively reduce costs to create greater profits. Therefore, it is necessary to learn more waterjet application techniques in order to use the lowest cutting cost to create greater profits.
Waterjet cutting shows that it can do some processing that other simple processes can’t complete. It can punch holes in titanium, cut various patterns on stone or glass, all of which show the uniqueness of waterjet itself. It does not generate heat when cutting the material. In this cold processing process, the supersonic water arrow it produces can achieve the desired effect when it shoots on the surface of the cutting material. The mixing of water and sand enhances its cutting ability.
The principle of high-pressure water generation:
The basic principle is both simple and complex. The water jet starts from the pressurized pump, passes through the high-pressure pipe, and then shoots out from the cutting nozzle. Very simple explanation. However, it has undergone a very complicated design to produce a pressure of 60,000 PSI. In the design process, a small leakage will cause permanent erosion of the components and cause damage. Therefore, manufacturers and engineers will carefully deal with the processing technology of high-pressure materials, using special technology to combine this machine. The user only needs to know the basic operating knowledge.
The cutting machine was used in industry in 1982, and the earliest appeared in 1970. In industry, it is mainly used in the automotive, aerospace, and glass industries, and the accuracy of these cuttings has been continuously improved. The pressure of the abrasive cutting machine can reach 55,000 PSI. This high-pressure water is ejected through a small nozzle at a speed of 762m/s, which is 2.5 times the speed of sound.
The pomegranate sand is mixed into this high-speed water jet, mixed in the mixing tube, and then shot directly from the sand tube to the processed material at a speed of 305M/sec. This cutting process is actually a kind of grinding cutting During the process, this power and movement are all produced by water.
The advantages of using a water cutting machine with a intensifier pump or a direct drive pump:
1. Wide cutting range
Can cut most materials, such as: metal, marble, glass and so on.
2. Good cutting quality
Smooth incision, will not produce rough, burr edges.
3. No heat processing
Because it uses water and abrasive cutting, there is no heat (or very little heat) during processing. This effect is ideal for materials affected by heat. Such as: titanium.
4. Environmental protection
This kind of machine uses water and sand to cut, this kind of sand will not produce poisonous gas during the processing process, and it can be discharged directly, which is more environmentally friendly.
5. No need to change tools
You don’t need to replace the cutting machine device, one nozzle can process different types of materials and shapes, saving cost and time.
6. Reduce burrs
Waterjet cutting with abrasive sand, the incision has fewer burrs
7. Fast programming
The program is mainly generated by CAD drawing software. You can design the line drawing at will in the layout, or input the DXF file generated from other software. In addition, the machine supports third-party software, such as nesting nesting software (used to put graphics in Fill the workpiece to minimize the loss of the workpiece).
8. Fast programming
The program generated by other software can be transferred into the machine, it can establish the tool path from CAD, and can calculate the precise positioning and cutting speed of the cutter head at more than 2,000 points/inch (800 points/cm). What you need to do Just specify the material and thickness you want to cut, and leave the other work to the machine to complete.
9. It can be combined with other equipment and can be operated separately.
The water jet cutting machine can be combined with other processing equipment (such as drilling heads) to make full use of its performance and optimize the degree of material utilization.
10. Reduce the number of adjustments
The workpiece can be fixed with only a small side pressure, reducing the trouble caused by complex clamping.
