60kpsi ultra high pressure water jet intensifier pump waterjet cutting pump
Specification of our water jet cutter intensifier pump:
|
Intensifier Pump |
Model | WMT3742Z |
| motor | SIEMENS | |
| Method of Direction Regulation | Electronic direction regulation | |
| Pressure Range | 50-420MPA, continuous pressure is 330-380Mpa | |
| Maximum Flow of Hydraulic
Pump |
90 L/min | |
| Maximum Discharge Capacity | 3.7 L/min | |
| Maximum Diameter of Gem
Nozzle |
0.33 mm | |
| Power of Master Motor | 37 KW | |
| Power Source | 380V/50HZ, also work at 220V/60HZ, 415V |
The core components of waterjet:
When we need to measure the quality of a piece of equipment, we usually turn our attention to the core components of the equipment. This is the case with waterjets. What are the core components of the water jet? What requirements need to be met if you want to meet the standard? Let’s take a look together.
There are many core components that affect the overall performance of the waterjet, such as high-pressure cylinders, accumulators, high-pressure plungers, high-pressure seals, and one-way valves. If a part fails, the waterjet may fail. Therefore, we must be careful when identifying parts.
Waterjet is a processing tool. If the processing efficiency is high, the failure rate is low, and the cost is low, then this product is relatively easy to be recognized by users. The cutting efficiency of the waterjet mainly refers to the cutting quality and cutting speed, which can only be known by practicing with materials; in many cases, the high-pressure system is often the fault of the waterjet. If this part is durable, failures will be reduced a lot.
Our pump:
We have 420Mpa intensifier pump, 600Mpa intensifier pump ,direct drive pump and 420mpa with dual intensifier pump, we also can provide 3 axis , 5 axis with 10 degree and dynamic 5 axis with 60 degree cutting head water jet cutting machine, pure water cutting and abrasive sand cutting. our machines are with excellent quality – efficient and accuracy, economical investment with low initial cost and low maintenance cost to our customers. All the machinery delivered by us come with first class after-sale service. all machines are with one-year warranty of main parts, whole-life after-service for the entire machine.Our new FLOW type cutting head can improve you 10% cutting efficiency, and our new technology can make the machine moving speed to 30-50m/min so that reduce you 15%-50% cutting cost according to the materials.
