1500*1500mm 15KW 5 Axis Water Jet Cutter Machine

5 AXIS 1500 * 1500 mm small Abrasive water jet cutting machine with 60000 psi direct drive pump water jet cutter
Water jet cutter quik details:

1. Pump:60000 psi direct drive pump

2. Adopt industrial PC

3. Marketing Type: New Product

Water jet cutter Advantages:

1. Water jet cutter compared with and laser cutting:

The investment in laser cutting equipment is relatively large. Currently, it is mostly used for cutting thin steel plates and some non-metallic materials. The cutting speed is faster and the accuracy is higher. However, the laser cutting will cause arc marks and heat effects at the kerf; It is not ambition for laser cutting of some materials, such as aluminum, copper and other non-ferrous metals and alloys, especially for the cutting of thicker metal plates. The cutting surface is not ideal, or even impossible to cut. At present, people’s research on high-power laser generators is trying to solve the cutting of thick steel plates, but the cost of equipment investment, maintenance and operation consumption is also very high. Waterjet cutting has low investment, low operating cost, wide range of cutting materials, high efficiency, and convenient operation and maintenance.

2. Compared with water cutting and plasma cutting:

Plasma cutting has obvious thermal effect, low precision, and it is not easy to perform secondary processing on the outside of the cutting. Water cutting is a cold cutting, no thermal deformation, good quality of the cutting surface, no secondary processing is required, and it is easier to perform secondary processing if necessary.

3. Compared with water cutting and wire cutting:

For metal processing, wire cutting has higher precision, but the speed is very slow. Sometimes other methods are needed to punch and thread to cut, and the cutting size is greatly limited. Water cutting can perforate and cut any material. The cutting speed is fast and the processing size is flexible.

4. Compared with other cutting methods:

For some metal parts, the punching and shearing process can be adopted, which has high efficiency and fast speed, but requires specific molds and tools. Compared with this cutting method, water cutting is more flexible and can be cut at any time for workpieces of any shape, especially when the material is thick. , In the case of high hardness, the punching and shearing process will be difficult or impossible to complete, and the method of water cutting machine is more suitable; flame cutting is also a commonly used cutting process in the metal field, and the cutting thickness range is very large, but compared with water cutting The thermal effect is obvious, and the cutting surface quality and accuracy are poor. In addition, water cutting can well solve the cutting processing of some special materials such as high melting point, alloys, and composite materials.In the cutting and processing industries of glass, stone, ceramics, etc., the traditional method is to use diamond cutters for cutting, sawing, milling, etc. The cutting thickness range is very large and the speed is relatively fast, but for conventional thickness plates, water cutting can stop high precision The cutting process of any curve, the yield rate is high, the cutting cost is reduced, and the added value of the processed product is greatly improved.