4000 * 2000 mm water jet cutting machine save your 70% cutting cost full automatic glass art cnc water jet cutter
Water jet cutter quik details:
1. Pump:420MPA intensifier pump
2. Adopt industrial PC
3. save 70% cutting cost
Features and advantages of our water jet cutter:
1. Wide cutting range:It can cut most materials, such as metal, marble, glass, etc.
2. Good cutting quality:Smooth incision, will not produce rough, burr edges.
3. No heat processing:Because it uses water and abrasive cutting, there is no heat (or very little heat) during processing. This effect is ideal for materials affected by heat. Such as: titanium.
4. Environmental protection:This kind of machine uses water and sand to cut. This kind of sand does not produce toxic gas during the processing process, and can be discharged directly, which is more environmentally friendly.
5. No need to change tools；You don’t need to replace the cutting machine device, one nozzle can process different types of materials and shapes, saving cost and time.
6. Reduce burrs;Waterjet cutting with abrasive sand has fewer burrs.
Water jet cutter advantage:
1. Fast programming:The program is mainly generated by CAD drawing software. You can design the line drawing in the layout at will, or input the DXF file generated from other software. In addition, the machine supports third-party software, such as nesting nesting software (used to put graphics in Filling the workpiece can minimize the loss of the workpiece).
2. Fast programming:The program generated by other software can be transferred into the machine, it can establish the tool path from CAD, and can calculate the precise positioning and cutting speed of the cutter head at more than 2000 points/inch (800 points/cm). What you need to do Just specify the material and thickness you want to cut, and leave the other work to the machine to complete.
3. It can be combined with other equipment and can be operated separately:The water jet cutter can be combined with other processing equipment (such as drilling heads) to make full use of its performance and optimize the degree of material utilization.
4. Reduce the number of adjustments:The workpiece can be fixed with only a small side pressure, reducing the trouble caused by complicated clamping.
5. No restriction on cutting direction → Various cutting shapes can be completed.
6. The generated horizontal and vertical forces are extremely small → The setting time and the cost of using fixtures can be reduced.
7. The drilling and cutting functions can be completed with the same machine → process time and cutting cost can be reduced.
